Incidenceinformation - quercus SmartLoop TS Programming Manual

QuercusVL Programming Manual
5: stopped car detector.
○
Volume: number of vehicles in the summary.
●
AvgSpeed: average speed of vehicles in the summary; in km/h. If value is -1,
●
the average speed calculation was not posssible.
AvgLength: average length of vehicles in the summary; in mm. If value is -1,
●
average length calculation was not possible.
AvgHeadway: average distance headway of vehicles in the summary; in
●
seconds.
SpeedsDistribution (SpdDst): values making up the distribution of speeds in the
●
summary. They are provided using 7 consecutive integers, where the ones that
are not used, show a -1.
SpeedsUpperLimit (SpdUL): values making up the ranges of distribution of
●
speeds in the summary. They are provided using 7 consecutive integers, where
the ones that are not used, show a -1.
LengthsDistribution (LenDst): collection of values making up the distribution of
●
lengths in the summary. They are provided using 7 consecutive integers, where
the ones that are not used, show a -1.
LengthsUpperLimit (LenUL): collection of values making up the ranges of
●
distribution of lengths in the summary. They are provided using 7 consecutive
integers, where the ones that are not used, show a -1.
OccupationsDistribution
●
distribution occupancies in the summary. They are provided using 7 consecutive
integers, where the ones that are not used, show a -1.
OccupationsUpperLimit (OccUL): collection of values making up the ranges of
●
distribution of occupancies in the summary. They are provided using 7
consecutive integers, where the ones that are not used, show a -1.
For more information about length, speed and occupation distributions, see SmartLoop
manual.

4.6.4. IncidenceInformation

Indicates that an incidence has been received.
The structure corresponds to the version 2. Check 5. Communications protocol (old versions)
to see the older versions.
Type: 3
●
Quercus Technologies
141
(OccDst): collection of values making up the
® user