quercus SmartLoop TS Programming Manual page 202

QuercusVL Programming Manual
TSSimu <typeP> <FGlobals> <FDetectors> <FLog> <DPersistent> <FSimulation>
●
TSSimuGui <typeP> <FGlobals> <FDetectors> <FLog> <DPersistent> <FSimulation>
●
Where:
TSSimu: simulator executable.
●
TSSimuGui: graphical interface simulator executable.
●
typeP: product type simulated:
●
SmartLoopTS
○
SmartLoopTSPlus
○
FGlobals: path (absolute or relative) to the unit configuration file.
●
FDetectors: path (absolute or relative) to the detectors configuration file.
●
FLog: path (absolute or relative) to the log file generated by TSSimu.
●
DPersistent: folder where summaries will be stored (simulates the Log/ folder of the
●
unit FTP). The simulator will create the sub-folder "Summaries" (if it don't exist).
FSimulation: file that contains the simulation instructions.
●
Quercus Technologies
202