quercus SmartLoop TS Programming Manual page 148

QuercusVL Programming Manual
the captured image. The central position of the rectangle coincides with the central
position of the magnified area. The focus value will be calculated from the enlarged
area.
The structures correspond to the version 1. Check 5. Communications protocol (old versions)
to see the older versions.
Query
Type: 37
●
Message Data:
●
2
RoiTop
RoiTop: Y value (vertical axis) from upper side of the rectangle; to not define it,
●
specify -1.
RoiLeft: X value (horizontal axis) from left side of the rectangle; to not define it,
●
specify -1.
RoiBottom (RoidBttm): Y value (vertical axis) from bottom side of the rectangle;
●
to not define it, specify -1.
RoiRight: X value (horizontal axis) from right side of the rectangle; to not define
●
it, specify -1.
ExposureTime: camera exposure time for the snapshot; in microseconds.
●
Zoom: indicates if the obtained image must be captured by the unit (false) or a
●
magnified one (true).
Offset: starting position (in the image buffer) of the packet to transfer; in bytes.
●
Length: maximum length of the packet to transfer.
●
Answer
Type: 69
●
Message Data:
●
4
Focus NumDetectors
4
Outputs
Quercus Technologies
148
2 2
2
RoiLeft RoiRight
RoiBttm
4
160
DStatus
4 4
ImageSize Length
4 1
ExposureTime Zoom
4
NumRedLights
64000
Buffer
4 4
Offset Length
3
RedLights
4
Inputs