Lengthsupperlimit Class - quercus SmartLoop TS Programming Manual

QuercusVL Programming Manual

3.34. LengthsUpperLimit Class

Collection of values making up the length ranges of a detector. For deeper information about
length distribution, see SmartLoop
3.34.1. Properties
Count
●
C++:
C:
from Summary
Number of values in the collection.
Item
●
C++:
C:
int item) from Summary
Returns the value in the indicated position, inside the collection of values making up the
length ranges of a detector. The values are sorted from lowest to highest, placing the
smallest value at the first position in the collection.
The parameter "item" must specify the position (starting from zero).
If there is no LengthsUpperLimit at the specified position, it returns an invalid one (see
IsValid from LengthsUpperLimit class).
3.35. OccupationsUpperLimit Class
Collection of values that make up the occupancy percentage ranges of a detector. For deeper
information about occupation distribution, see SmartLoop
3.35.1. Properties
Count
●
C++:
C:
VL_Summary_get_OccupationsUpperLimit_Count(int h) from Summary
Number of values the collection.
Quercus Technologies
® user manual.
int Count ( )
Does not exist, check VL_Summary_get_LengthsUpperLimit_Count(int h)
int Item ( int item )
Does not exist, check VL_Summary_get_LengthsUpperLimit_Item(int h,
int Count ( )
Does
user manual.
®
not exist, check
80