Table of Contents
Advertisement
HOME screen
The Home screen displays the basic camera settings and is used to change those settings.
[FPS]
[SHUTTER]
[EI]
[WB]
[COLOR]
Chapter 5 Control Panel — HOME screen
Sets the frame rate.
[VFR]
[PRESET]
[VARIABLE]
Sets the shutter speed.
[ON]/[OFF]
[PRESET]
[SYNCHRO]
[deg/sec]
Sets the EXPOSURE INDEX (gain).
[ISO/dB]
[NATIVE ONLY]
[800BASE]
[5000BASE]
Sets the color temperature (white balance).
[AWB]
[PRESET]
[TEMP SHIFT]
[GMg]
Sets the video colors (gamma and gamut).
[MAIN COLOR]
[SUB COLOR]
[Grading SEL]
[3D LUT]
[CDL]
Toggles the variable frame rate.
When this is [OFF], the frame rate become 1x the rate set in [MENU] →
[SYSTEM SETTING] → [FREQUENCY].
f When this is [ON], audio cannot be recorded. Audio is recorded at the sub
recorder.
Mode for selecting preset frame rates.
Up to 12 presets can be stored in memory.
Presets can be added/deleted using [ADD]/[DEL].
Mode for selecting from the overall variable range.
The variable step changes through [FINE]/[NORMAL]/[COARSE].
[OFF] means shutter off (open angle 360 deg).
Mode for selecting preset shutter speeds.
Up to 12 can be registered.
Presets can be added/deleted using [ADD]/[DEL].
Mode for selecting from the overall variable range.
The variable step changes through [FINE]/[COARSE].
Determines the shutter setting unit.
[deg]: Open angle
[sec]: Second
Selects the setting method.
Only the native ISO can be selected. (when [ISO] is set)
The ISO800 standard value can be selected. (when [ISO] is set)
The ISO5000 standard value can be selected. (when [ISO] is set)
Executes automatic white balancing.
Mode for selecting preset white balance values.
Up to 12 can be registered.
Presets can be added/deleted using [ADD]/[DEL].
If [AWB] is performed, the results are automatically added to the choices.
Mode for making adjustments from the overall variable range.
Shifts to the Green-Magenta axis.
Sets the output colors of videos from terminals <SDI OUT1> to <SDI OUT4> as
well as videos recorded in the main recorder.
Sets the colors of videos recorded in the sub recorder.
Sets the grading function.
[MAIN COLOR] is only enabled in [V-Log] mode.
Sets the grading in the [3D LUT].
[Grading SEL] is disabled when this is [OFF].
When [Grading SEL] is set to [Internal] or [External App]
f Loads from the SD memory card using [LOAD].
f Saves the setting value to the SD memory card with [SAVE AS].
Sets the grading in [CDL].
[Grading SEL] is disabled when this is [OFF].
When [Grading SEL] is set to [Internal] or [External App]
f Sets [Slope]/[Offset]/[Power]/[Saturation] on the control panel.
f Loads from the SD memory card using [LOAD].
f Saves the setting value to the SD memory card with [SAVE AS].
– 54 –
Advertisement
Table of Contents
