Table of Contents
Advertisement
In Strobe Multi Mode, you can select the
rate at which a succession of still screens
are captured from the playback picture
Before you begin-
• Connect the Palmcorder to a power
source (See pages 11, 12)
1 Set POWER to VCR
3, 4
JOG KEY
SmuLTI Button
Note
• A Multi Image Playback screen cannot be
output from the DV terminal or Digital Still
Image terminal
• A Multi screen will have slightly lower
t
image quality
• The POWER lamp lights red
• Be sure POWER is fully turned to
VCR position
2
Press MENU to display the menu
screen
3 Rotate and press JOG KEY to select
MUlKrjlSEfTiTIlNG
4
Press JOG KEY repeatedly to set
desired speed
Strobe Speeds
FAST
Every 0 3 seconds
norm
Every 0 6 seconds
SLOW
Every 1 0 seconds
• Press MENU twice to exit
3 Press ► (PLAY) to start playback
Press ► (MULTI) at the point you want
to start capturing
• A succession of 9 screens will be
captured, and playback will stop
/-
CD-
-(D '
*<§>-
-CD
[
®-
• Press ► (PLAY) to start playback
Press ■ (STOP) to stop playback
47
Advertisement
Table of Contents
