Provisioning Switching Point Tlv Security - Cisco ASR 9000 Series Configuration Manuallines

Provisioning Switching Point TLV Security

Saves configuration changes to the running configuration file and remains in the configuration session.
Provisioning Switching Point TLV Security
For security purposes, the TLV can be hidden, preventing someone from viewing all the switching points the
pseudowire traverses.
Virtual Circuit Connection Verification (VCCV) may not work on multisegment pseudowires with the
switching-tlv parameter set to "hide". For more information on VCCV, see the
Verification on
SUMMARY STEPS
1. configure
2. l2vpn
3. pw-class class-name
4. encapsulation mpls
5. protocol ldp
6. switching-tlv hide
7. commit
DETAILED STEPS
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Enters the Global Configuration mode.
Step 2
l2vpn
Example:
RP/0/RSP0/CPU0:router(config)# l2vpn
Enters L2VPN configuration mode.
Step 3 pw-class class-name
Example:
RP/0/RSP0/CPU0:router(config-l2vpn)# pw-class dynamic_mpls
Enters pseudowire class submode, allowing you to define a pseudowire class template.
Step 4 encapsulation mpls
Example:
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
116
L2VPN".
Implementing Point to Point Layer 2 Services
"Virtual Circuit Connection