Changing/Deleting A Privacy Mask Area - Canon VB-M40 Operation Manual

Changing/Deleting a Privacy Mask Area

How to Change
Select the privacy mask area you want to change.
1
Click the privacy mask area you want to change in the
capture area or select a privacy mask area by clicking
[Next].
Change the position and size of the privacy mask area.
2
Privacy mask areas can be changed using the mouse
or by entering values.
Entering values
Click [Detailed Settings] and then [Get camera info] to
load the current pan, tilt, and zoom settings.
Enter a value for the position and size of the privacy
mask and click [Preview settings] to check the
position and size of the preview frame.
If you want to cancel the changes and restore the
settings saved in the camera, click [Restore settings].
Click [Quick change] to save the privacy mask area.
3
The changed privacy mask area is saved in the
camera.
Note
Select a disabled privacy mask and click [Quick change] to
enable it.
5
-8
How to Delete
Select the privacy mask area you want to delete and click
[Delete].
The privacy mask area that was saved in the camera is
deleted.