Conext XW+ 6848 NA Owner's Manual page 6

About This Guide
Organization
Abbreviations and Acronyms
CEC
CSA
GT
LCD
LED
MPPT
NEC
PV
PVGFP
UL
VAC
VDC
Related Information
iv
This Guide is organized into four chapters and three appendices.
Chapter 1, "Introduction", describes the operational features of the Conext XW+
Inverter/Charger.
Chapter 2, "Monitoring Operation", contains information about monitoring Conext
XW+ Inverter/Charger operation using the inverter information panel or the
Conext System Control Panel.
Chapter 3, "Configuration" explains how to navigate through the Conext System
Control Panel menus and configure the Conext XW+ Inverter/Charger.
Chapter 4, "Troubleshooting", contains information and procedures for identifying
and solving possible problems with the Conext XW+ Inverter/Charger.
Appendix A, "Specifications" provides the electrical and mechanical
specifications for the Conext XW+ Inverter/Charger.
Appendix B contains the default configuration settings and ranges for the Conext
XW+ Inverter/Charger. Configuration settings can be viewed and changed using
the Conext System Control Panel.
California Energy Commission
Canadian Standards Association
Grid Tie
Liquid Crystal Display
Light Emitting Diode
Maximum Power Point Tracking
US National Electrical Code NFPA-70
Photovoltaic
PV Ground Fault Protection
Underwriters Laboratories
Volts AC
Volts DC
For information about installing the Conext XW+ Inverter/Charger, see the Conext
XW+ Inverter/Charger Installation Guide (975-0384-01-02).
You can find more information about Schneider Electric as well as its products
and services at http://solar.schneider-electric.com.
For available accessories, see "Available Conext XW+ Accessories" on page 1–
3.
975-0240-01-01