Conext XW+ 6848 NA Owner's Manual page 54

Configuration
3–6
To select and change a configurable setting:
1. On the desired configuration menu, press the up arrow or down arrow button
to highlight the setting you want to change.
2. Press Enter to highlight the current value of the setting.
3. Press the up arrow or the down arrow button to change the value. Hold down
the button to scroll through a large range of values quickly.
The previously set value appears with an asterisk (*) beside it.
4. Press Enter to select the value.
5. If you have another setting to change, return to step 1. Or if you have no
more settings to change, press Exit until the Conext SCP displays the
desired screen or menu.
Note: If you have no more settings to change, it is recommended to leave the
Setup menu in the basic settings format to help prevent unintended
configuration. If the Setup menu displays Advanced Settings, press Enter + up
arrow + down arrow at the same time. The Setup menu should then display
Basic Settings as the last item on the menu.
975-0240-01-01