Figure 6-2. Removing Remote Radio Control Cable From Back Housing; Figure 6-3. Removing Special Nut From Speaker Phone Jack - Motorola PM1200 Basic Service Manual

Disassembly/Reassembly Procedures: Replacement Procedures
NOTE: Be careful not to damage the mating connector while unplugging the remote control
Remote Radio Control Cable

Figure 6-2. Removing Remote Radio Control Cable from Back Housing

6. After unplugging the remote radio control cable connector, use a CR-V PH2 screwdriver to
remove the 4 binding head screws M4x8 SUS B [34] with the 4 o-rings [33] from the back
housing assembly [29].
7. Using a special nut driver, first remove the special nut [26], then remove the ear cap [30] from
the back housing assembly [29] as shown in

Figure 6-3. Removing Special Nut from Speaker Phone Jack

8. Carefully separate the back housing assembly [29] from the front housing assembly [10].
6880309U09-A
cable.
Figure 6-3.
6-3
October 26, 2007