Figure 6-38. Removing Mating Connection From Main-Unit Board Kit; Figure 6-39. Removing Holder From Chassis - Motorola PM1200 Basic Service Manual

6-22 Disassembly/Reassembly Procedures: Replacement Procedures
6. Unplug the mating connector [C] of the wire assembly [27] from the main-unit board kit [13] as
shown in Figure 6-38.
Mating Connector [C]

Figure 6-38. Removing Mating Connection from Main-Unit Board Kit

7. Separate the holder [15] from the chassis [11] as shown in Figure 6-39.

Figure 6-39. Removing Holder from Chassis

October 26, 2007 6880309U09-A