Figure 6-31. Sequence For Installing Top Cover Screws; Figure 6-32. Installing Remote Radio Control Cable To Front Panel - Motorola PM1200 Basic Service Manual

6-18
9. Using a CR-V PH2 torque driver, fasten the 7 binding head screws, M3x6 SUS B [23] to the
top cover [24] following the sequence as shown in
5.8–6.9 kgf*cm/ 5–6 in. lbs).
10. Carefully plug-in the remote radio control cable to the mating connector (red color) on the
front panel [4] as shown in

Figure 6-32. Installing Remote Radio Control Cable to Front Panel

11. Neatly bundle the exposed cable wiring, and then install the gasket [3] and cable strain relief
plate [2] into the place.
October 26, 2007
Disassembly/Reassembly Procedures: Replacement Procedures
5
2

Figure 6-31. Sequence for Installing Top Cover Screws

Figure 6-32.
Figure 6-31. (Torqued to
4
3
6
7
1
6880309U09-A