Introduction Of Programming Procedures; Cps Programming Setup; Figure 5-10. Cps Programming Setup With Rib; Figure 5-11. Cps Programming Setup Cable With Internal Rib - Motorola PM1200 Basic Service Manual

5-12
5.6

Introduction of Programming Procedures

This section provides an overview of the Customer Programming Software (CPS) designed for use
in Windows 2000/XP environment. Refer to the the CPS Installation Guide for the installation and
programming procedures of the software.
5.6.1

CPS Programming Setup

Follow the CPS programming setups as shown in
NOTE: Refer to the appropriate program on-line help file for detailed programming procedures.
Programming
Cable
AARKN4083
Programming Cable AARKN4081

Figure 5-11. CPS Programming Setup Cable with Internal RIB

October 26, 2007
Radio Alignment and Programming Procedures: Introduction of Programming Procedures
ACC
DC (DC)
+
Power
RF
Supply
RIB
RLN-4008
DB25
Cable 3080369B72 (9 PIN)

Figure 5-10. CPS Programming Setup with RIB

ACC
DC (DC)
+
Power
RF
Supply
Figure 5-10 and
DB15
Tx Data
Rx Data
Gnd
Tx Data
Rx Data
Gnd
DB25
Figure 5-11 to program the radio.
6880309U09-A