6-16
12. Carefully disconnect the connection cable from the RF-Interface unit board kit [7] as shown in
Figure
6-27.
13. Carefully separate the front panel [4] and rubber packing [5] from the radio.
6.2.3.1.2 Transceiver Front Panel Reassembly
1. Seal the front panel [4] with the rubber packing [5].
2. Carefully connect the connection cable to the RF-Interface unit board kit [7] as shown in
Figure
6-28.
3. Carefully mate the front panel [4] to the front of the transceiver radio.
October 26, 2007
Disassembly/Reassembly Procedures: Replacement Procedures
Figure 6-27. Removing Connection Cable
Figure 6-28. Installing the Connection Cable
6880309U09-A