Cisco ASR 9000 Series Configuration Manual page 588

Configure Static Routes Between PE-CE Routers
VRF fallback is not supported with IPv6 VPN Provider Edge (6VPE).
Note
SUMMARY STEPS
1. configure
2. router static
3. vrf vrf-name
4. address-family { ipv4 | ipv6 } { unicast | multicast }
5. prefix mask [vrf vrf-name ] { ip-address | interface-type interface- path-id } [ distance ] [ description
text ] [ tag tag ] [ permanent ]
6. commit
DETAILED STEPS
Step 1
configure
Step 2 router static
Example:
RP/0/RSP0/CPU0:router(config)# router static
Enters static route configuration mode.
Step 3 vrf vrf-name
Example:
RP/0/RSP0/CPU0:router(config-static)# vrf vrf_A
(Optional) Enters VRF configuration mode.
If a VRF is not specified, the static route is configured under the default VRF.
Step 4 address-family { ipv4 | ipv6 } { unicast | multicast }
Example:
RP/0/RSP0/CPU0:router(config-static-vrf)# address family ipv6 unicast
Enters address family mode.
Step 5 prefix mask [vrf vrf-name ] { ip-address | interface-type interface- path-id } [ distance ] [ description text ] [ tag
tag ] [ permanent ]
Example:
RP/0/RSP0/CPU0:router(config-static-vrf-afi)# 2001:0DB8::/32 2001:0DB8:3000::1 201
Configures an administrative distance of 201.
Step 6 commit
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
560
Implementing Static Routes
OL-30423-03