Cisco ASR 9000 Series Configuration Manual page 186

Configuring Resilient Per-CE Label Allocation Mode
SUMMARY STEPS
1. configure
2. route-policypolicy-name
3. set label mode per-ce
4. Do one of the following:
DETAILED STEPS
Step 1 configure
Example:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)#
Enters global configuration mode.
Step 2 route-policypolicy-name
Example:
RP/0/RSP0/CPU0:router(config)# route-policy route1
RP/0/RSP0/CPU0:router(config-rpl)#
Creates a route policy and enters route policy configuration mode.
Step 3
set label mode per-ce
Example:
RP/0/RSP0/CPU0:router(config-rpl)# set label mode per-ce
RP/0/RSP0/CPU0:router(config-rpl)#
Configures resilient per-ce label allocation mode.
Step 4
Do one of the following:
• end
• commit
Example:
RP/0/RSP0/CPU0:router(config-rpl)# end
or
RP/0/RSP0/CPU0:router(config-rpl)# commit
Saves configuration changes.
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
158
• end
• commit
Implementing BGP
OL-30423-03