Cisco ASR 9000 Series Configuration Manual page 598

Configuring Route Convergence Monitoring and Diagnostics
Command or Action
Step 10 disable
Example:
RP/0/RSP0/CPU0:router(config-rcmd-proto-prio)#disable
Step 11
leaf-network number
Example:
RP/0/RSP0/CPU0:router(config-rcmd-proto-prio)#leaf-network
100
Step 12 threshold value
Example:
RP/0/RSP0/CPU0:router(config-rcmd-proto-prio)#threshold
1000
Step 13
storage-location
Example:
RP/0/RSP0/CPU0:router(config-rcmd)#storage-location
RP/0/RSP0/CPU0:router(config-rcmd-store)#
Step 14 diagnostics directory-path-name
Example:
RP/0/RSP0/CPU0:router(config-rcmd-store)#diagnostics
/disk0:/rcmd
Step 15
diagnostics-size
Example:
RP/0/RSP0/CPU0:router(config-rcmd-store)# diagnostics-size
8
Step 16 reports directory-path-name
Example:
RP/0/RSP0/CPU0:router(config-rcmd-store)#reports
/disck0:/rcmd
Step 17
reports-size
Example:
RP/0/RSP0/CPU0:router(config-rcmd-store)#reports-size 8
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
570
Purpose
• Low-Set to monitor route convergence for
low priority routes
Disables the monitoring of route convergence for
specified priority.
Enables leaf network monitoring. Specify a
maximum number of leaf networks to be
monitored. Range for maximum number is
10-100.
Specifies threshold value for convergence in
milliseconds. Select a threshold value from the
range. Range is 0-4294967295 milliseconds
Sets the absolute directory path for storing
diagnostic reports.
Specifies the absolute directory path for storing
diagnostic reports. Set a directory-path-name.
Example: /disk0:/rcmd/ or <tftp-location>/rcmd/
Specify a maximum size for the diagnostics
directory. Set the size in %. Range is 5%-80%.
Specifies the absolute directory path for storing
reports. Set a directory-path-name. Example:
/disk0:/rcmd/ or <tftp-location>/rcmd/
Specify a maximum size for the reports directory.
Set the size in %. Range is 5%-80%.
Implementing RCMD
OL-30423-03