Configuring Domain Distinguisher - Cisco ASR 9000 Series Configuration Manual

Configuring BGP Link-State
Command or Action
Step 3
neighbor ip-address
Example:
RP/0/RSP0/CPU0:router(config-bgp)# neighbor
10.0.0.2
Step 4 remote-as as-number
Example:
RP/0/RSP0/CPU0:router(config-bgp-nbr)# remote-as
1
Step 5 address-family link-state link-state
Example:
RP/0/RSP0/CPU0:router(config-bgp-nbr)#
address-family link-state link-state
Step 6 commit

Configuring Domain Distinguisher

To configure unique identifier four-octet ASN, perform these steps:
SUMMARY STEPS
1. configure
2. router bgp as-number
3. address-family link-state link-state
4. domain-distinguisher unique-id
5. commit
DETAILED STEPS
Command or Action
Step 1 configure
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
144
Purpose
Configures a CE neighbor. The ip-address argument
must be a private address.
Configures the remote AS for the CE neighbor.
Distributes BGP link-state information to the specified
neighbor.
Purpose
Implementing BGP
OL-30423-03