Cisco ASR 9000 Series Configuration Manual page 597

Implementing RCMD
DETAILED STEPS
Command or Action
Step 1
configure
Step 2 router-convergence
Example:
RP/0/RSP0/CPU0:router(config)#router-convergence
Step 3
collect-diagnostics location
Example:
RP/0/RSP0/CPU0:router(config-rcmd)#collect-diagnostics
0/3/CPU0
Step 4 event-buffer-size number
Example:
RP/0/RSP0/CPU0:router(config-rcmd)#event-buffer-size 100
Step 5 max-events-stored number
Example:
RP/0/RSP0/CPU0:router(config-rcmd)#max-events-stored 10
Step 6
monitoring-interval minutes
Example:
RP/0/RSP0/CPU0:router(config-rcmd)#monitoring-interval 120
Step 7 node node-name
Step 8 protocol
Example:
RP/0/RSP0/CPU0:router(config-rcmd)#protocol ISIS
RP/0/RSP0/CPU0:router(config-rcmd-proto)#
Step 9
priority
Example:
RP/0/RSP0/CPU0:router(config-rcmd-proto)#priority critical
RP/0/RSP0/CPU0:router(config-rcmd-proto-prio)#
OL-30423-03
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
Configuring Route Convergence Monitoring and Diagnostics
Purpose
Enters configure Router Convergence Monitoring
and Diagnostics (rcmd) configuration mode.
Configures to collect diagnostics on specified
node.
Sets event buffer size 9as number of events) for
storing event traces .
Sets maximum number of events to be stored in
the server.
Sets interval (in minutes) to collect logs.
Configures parameters for a specified node.
RP/0/RSP0/CPU0:router(config-rcmd)#node
Specifies the protocol for which to configure
RCMD parameters.
• ISIS-Select ISIS to configure parameters
related to ISIS protocol
• OSPF-Select OSPF to configure parameters
related OSPF protocol
Sets priority for monitoring of route convergence
for the specified protocol.
• Critical-Set to monitor route convergence
for critical priority routes
• High-Set to monitor route convergence for
high priority routes
• Medium-Set to monitor route convergence
for medium priority routes
569