Customizing Rip - Cisco ASR 9000 Series Configuration Manual

Implementing RIP
Command or Action
Example:
RP/0/RSP0/CPU0:router(config-rip-if)# send
version 1 2
Step 8
commit

Customizing RIP

This task describes how to customize RIP for network timing and the acceptance of route entries.
SUMMARY STEPS
1. configure
2. router rip
3. auto-summary
4. timers basic update invalid holddown flush
5. output-delay delay
6. nsf
7. interface type interface-path-id
8. metric-zero-accept
9. split-horizon disable
10. poison-reverse
11. commit
DETAILED STEPS
Command or Action
Step 1 configure
Step 2 router rip
Example:
RP/0/RSP0/CPU0:router(config)# router
rip
Step 3
auto-summary
Example:
RP/0/RSP0/CPU0:router(config-rip)#
auto-summary
OL-30423-03
Purpose
Configures a RIP routing process.
(Optional) Enables automatic route summarization of subnet routes
into network-level routes.
• By default, auto-summary is disabled.
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
Purpose
• Only RIP v1
• Only RIP v2
• Both RIP v1 and RIP v2
Customizing RIP
451