Configuring Bfd Ipv6 Multihop For Ibgp Neighbors - Cisco ASR 9000 Series Configuration Manual

Implementing BFD
Command or Action
Step 5
neighbor ip-address bfd fast-detect
Example:
RP/0/RSP0/CPU0:router(config-bgp)#neighbor
21:1:1:1:1:1:1:2 bfd fast-detect
Step 6 commit

Configuring BFD IPv6 Multihop for iBGP Neighbors

Perform this task to configure BFD IPv6 Multihop for iBGP neighbors:
SUMMARY STEPS
1. configure
2. bfd multipath include location node-id
3. router bgp as-number
4. neighbor ip-address bfd fast-detect
5. commit
DETAILED STEPS
Command or Action
Step 1 configure
Step 2 bfd multipath include location node-id
Example:
RP/0/RSP0/CPU0:router(config)#bfd multipath include
location 0/7/CPU0
Step 3 router bgp as-number
Example:
RP/0/RSP0/CPU0:router(config)#router bgp 65001
Step 4
neighbor ip-address bfd fast-detect
Example:
RP/0/RSP0/CPU0:router(config-bgp)#neighbor
21:1:1:1:1:1:1:2
Step 5 commit
OL-30423-03
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
Configuring BFD IPv6 Multihop
Purpose
Specifies IP address of the eBGP neighbor and
enables BFD fast detection.
Purpose
Includes specified line cards to host BFD
multihop sessions.
Enters BGP configuration mode.
Specifies IP address of the iBGP neighbor and
enables BFD fast detection.
221