Cisco ASR 9000 Series Configuration Manual page 184

Configuring Resilient Per-CE Label Allocation Mode
SUMMARY STEPS
1. configure
2. router bgpas-number
3. vrfvrf-instance
4. address-family {ipv4 | ipv6} unicast
5. label mode per-ce
6. Do one of the following:
DETAILED STEPS
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)#
Enters global configuration mode.
Step 2 router bgpas-number
Example:
RP/0/RSP0/CPU0:router(config)# router bgp 666
RP/0/RSP0/CPU0:router(config-bgp)#
Specifies the autonomous system number and enters the BGP configuration mode, allowing you to configure the BGP
routing process.
Step 3
vrfvrf-instance
Example:
RP/0/RSP0/CPU0:router(config-bgp)# vrf vrf-pe
RP/0/RSP0/CPU0:router(config-bgp-vrf)#
Configures a VRF instance.
Step 4 address-family {ipv4 | ipv6} unicast
Example:
RP/0/RSP0/CPU0:router(config-bgp-vrf)# address-family ipv4 unicast
RP/0/RSP0/CPU0:router(config-bgp-vrf-af)#
Specifies either an IPv4 or IPv6 address family unicast and enters address family configuration submode.
Step 5 label mode per-ce
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
156
• end
• commit
Implementing BGP
OL-30423-03