Configuring Rpki Prefix Validation - Cisco ASR 9000 Series Configuration Manual

Implementing BGP
Command or Action
Step 10
Use one these commands.
• response-time time
• response-time off
Example:
RP/0/RSP0/CPU0:router(config-bgp-rpki-server)#response-time
30
Or
RP/0/RSP0/CPU0:router(config-bgp-rpki-server)#response-time
off
Step 11 commit
Step 12
shutdown
Example:
RP/0/RSP0/CPU0:router(config-bgp-rpki-server)#shutdown

Configuring RPKI Prefix Validation

Perform this task to control the behavior of RPKI prefix validation processing.
•
SUMMARY STEPS
1. configure
2. router bgp as-number
3. Use one of these commands.
4. bgp origin-as validation signal ibgp
5. commit
DETAILED STEPS
Command or Action
Step 1
configure
OL-30423-03
• bgp origin-as validation disable
• bgp origin-as validation time {off | prefix_validation_time
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
BGP Prefix Origin Validation Based on RPKI
Purpose
Configures the time BGP waits for a response after
sending a serial or reset query. Set response-time
in seconds. Range for the response time is 15 to
3600 seconds.
Configure the off option to wait indefinitely for a
response.
(Optional)
Configures shut down of the RPKI cache.
Purpose
67