Enabling Selective Vrf Download - Cisco ASR 9000 Series Configuration Manual

Enabling Selective VRF Download

What to Do Next
These show bgp command output displays information from the dynamic route leaking configuration:
• Use the show bgp prefix command to display the source-RD and the source-VRF for imported paths,
• Use the show bgp imported-routes command to display IPv4 unicast and IPv6 unicast address-families
Enabling Selective VRF Download
To enable selective VRF download, configure the svd platform enable command followed by router reload.
Selective VRF download is disabled by default.
Note
SUMMARY STEPS
1. admin
2. configure
3. svd platform enable
4. commit
5. show svd state
6. admin
7. reload location all
8. exit
9. show svd role
DETAILED STEPS
Command or Action
Step 1 admin
Example:
RP/0/RSP0/CPU0:router# admin
Step 2
configure
Example:
RP/0/RSP0/CPU0:router(admin)#configure
Step 3 svd platform enable
Example:
RP/0/RSP0/CPU0:router(admin-config)#svd platform enable
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
152
including the cases when IPv4 or IPv6 unicast prefixes have imported paths.
under the default-VRF.
Implementing BGP
Purpose
Enters administration EXEC mode.
Enters Administrative configuration
mode.
Enables selective VRF download.
OL-30423-03