Table of Contents
Advertisement
9
PICTURE CONTROL IN ADJUSTMENT MODE
The picture control menu is split up in two parts :
Signal operations
and
Screen operations.
Signal operations : to manipulate the video signal, e.g. sync slow/fast, color balance adjustment etc.
Screen operations : to manipulate the projection window and the picture, e.g. shift, stretch, enlarge and reduce.
Signal operations.
Select first the Picture Control menu on the Main menu by pushing
the control disk up or down.
Press ENTER to select.
Push the control disk up or down to select Signal Operations.
The default setting for all items are shown in the menu next to this text.
To change a value in the Signal Operation menu, select first the item
by pushing the control disk up or down and follow then one of the two
following methods :
a. direct access, with the numeric keys on the RCU or local keypad.
b. scrolling by pushing the control disk to the right or to the left until
the desired value (image quality) is obtained.
Video offset
Default value : 128
To adjust the Video offset, be sure the contrast level is adjusted to "48"
(brightness setting has no influence) and the color saturation is set to
zero (for video). When possible use a grey scale test pattern. Adjust
until the second last bar (dark grey) is distinguishable from the last bar
(black).
Gain
Default value : 160
To adjust the Gain, be sure the contrast level is adjusted to "48".
When possible use a grey scale test pattern. Adjust until the first white
bar is distinguishable from the second white bar.
5975348 BARCOVISION 8200 210497
Picture Control in Adjustment Mode
MAIN MENU
Picture Control
System Settings
File service
Service Mode
PICTURE CONTROL
Signal operation
832a
Screen operation
SIGNAL OPERATIONS
Video offset
Gain
Gain red
Gain green
Gain blue
Gamma
Smoothness
Still Video
Sync
Color balance
128
860a
160
160
160
1.0
4
[Off]
[Slow]
859
861
861
9-1
Advertisement
Table of Contents
