Table of Contents
Advertisement
FOLDING
Unscrew the adjustment knob (30) from the mainframe (45) and remove the pull pin (21), then pull the
rower frame (1) in towards the main housing unit and replace the pull pin to keep the rower in a folded
position.
Then down the rear stabilizer (7). (NB please ensures that the sensor cables do not get trapped
when tilting the mainframe bar in towards the main housing).
RESISTANCE ADJUSTMENT
3
2
4
5
1
T
L
S
O
C
E
O N
I
N
Turn the Tension Knob (31) clockwise for high resistance tension, for
lower resistance turns the tension knob by anti-clockwise.
O N T
R
9
Advertisement
Table of Contents
