Invite Members To Conference; Table 17: Gvc3200/Gvc3202 Conference Member Status Descriptions - Grandstream Networks GSGVC3202 User Manual

•
Users could press the red/blue/yellow shortcut keys on the remote control to input DTMF, view
notifications and view status.
•
During an active conference call, if there is a new member joining conference, an outgoing call failed
or a member hanging up, there will be a prompt box on the left side of the conference screen showing
notifications. The notification prompt will be hidden automatically if there is no new notification in 2
seconds.
•
On the right side of the video conference screen, users can see member status such as audio/video
calls, or whether if the call is being muted.

Table 17: GVC3200/GVC3202 Conference Member Status Descriptions

•
On the upper left side of the video conference screen, users can see an icon
network unstable condition, which means the current network condition is not good enough for the
video call using the selected resolution/bit rate.

Invite Members to Conference

Users could use one of the following ways to add members:
•
Access the dial screen by clicking on the ADD icon
number to dial out. Once the member answers the call, it will be connected into the conference
automatically.
•
When GVC3200/GVC3202 is on conference screen, press on
the call screen. Then, enter the number to dial out. Once the member answers the call, it will be
connected into the conference automatically.
•
The member calls the conference number. If the host answers the call, the member will be added into
conference automatically.
Icons Descriptions
The current line is in an audio call.
The current line is in a video call.
The current line is being muted.
The current line is not connected.
GVC3200/GVC3202 User Guide
Version 1.0.3.64
to indicate
on conference screen. Then, enter the
the remote control to access
P a g e | 69