Ethernet; Wi-Fi (Gvc3200 Only); Proxy - Grandstream Networks GVC3200 Administration Manual


Available Devices
Display all devices in the search range which have enabled Bluetooth.

ETHERNET

Click on IPv4 Settings to edit Ethernet settings. By default DHCP is used for the device to obtain IP
address from LAN network.

Address Type
Allow users to configure the appropriate network settings on the device. Users could select "DHCP",
"Static IP" or "PPPoE". By default, it is set to "DHCP".

IP Address
Enter the IP address when static IP is used.

Subnet Mask
Enter the subnet mask when static IP is used.

Default Router
Enter the default router when static IP is used.

DNS Server 1
Enter the DNS Server 1 address when static IP is used.

DNS Server 2
Enter the DNS Server 2 address when static IP is used.

PPPoE Account ID
Enter the PPPoE account ID when PPPoE is used.

PPPoE Password
Enter the PPPoE password when PPPoE is used.

Wi-Fi (GVC3200 ONLY)


Enable/Disable Wi-Fi
Enable/disable Wi-Fi. Once enabled, the device will search for available Wi-Fi nearby automatically.
Click on the Wi-Fi network SSID and enter authentication information in the prompt. Users could also
configure DHCP, Static IP or PPPoE for Wi-Fi by clicking on "Show advanced options" in the prompt.

PROXY


Proxy hostname
Configure HTTP/HTTPS proxy URI of the network. Some of the networks require going through a
proxy to access to the Internet.
Firmware Version 1.0.1.48
www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
GVC3200/GVC3202 Administration Guide Page 23 of 71