golmar NEXA User Manual page 142

AUDIO AND VIDEO DOOR ENTRY SYSTEM - CODED PANEL WITH DISPLAY
PROGRAMMING THE DOOR PANEL
Continued from previous page
Resident list menu:
CALL CODE
0 2 9
RESIDENT NAME
BUS CODE
CALL CODE
VISIBLE
RESIDENT NAME
BUS CODE
CALL CODE
VISIBLE
BUS CODE
CALL CODE
VISIBLE
ACCESS ENABLED?
CALL CODE
VISIBLE
ACCESS ENABLED?
ACCESS CODE
ACCESS CODE
1
CALL CODE
VISIBLE
ACCESS ENABLED?
ACCESS CODE
VISIBLE
ACCESS ENABLED?
ACCESS CODE
ACTIVE OUTPUTS
ACCESS ENABLED?
ACCESS CODE
ACTIVE OUTPUTS
TIME FRAME
SETTING RECORDED
:000000
1 0 5
RESIDENT NAME
BUS CODE
VISIBLE
Enables the contact to be made visible in the CONTACTS RESIDENT
LIST. The factory default setting is YES.
To change, press
Enables ACCESS CONTROL to be activated for the user. The factory
default setting is
To change, press
Enables the code
ACCESS CONTROL to be defined (see p. 136). Using this code, the
user can activate the relay outputs configured in the ACTIVE
OUTPUTS option.
To change, press
the access code for the user using the numeric keypad and confirm by
pressing
Press
( ) Bear in mind the number of digits in the configured code (factory
*
setting= 4
:0000
2 3 4
CALL CODE
VISIBLE
ACCESS ENABLED?
Enables the outputs that the user will activate when entering the
ACCESS CODE to be defined. The R1, R2 and P outputs located on
the N3301/AL module, the R3 output corresponds to the output to the
CV1 lock release relay, CV2 of the EL632/EL642 sound module.
To change, press
Enables one of the 8 time slots during which the user will have access
using the ACCESS CODE to be defined.
To change the time slots, go to the ACCESS CONTROL option: TIME
SLOT 1..8 on p. 140.
To change, press
Press the
otherwise the process will be cancelled.
029105
.
YES .
.
(from 0001 to 9999)
and the message ACCESS CODE will appear; enter
. This must be di ferent for each user. f
to restore the previous value.
, it will be from 0001 to 9999
1234
until the required setting is reached.
until the required setting is reached.
button to save the contact if changes have been made,
*
that the user will have to activate
).
Continued overleaf
142