Outside Reader Installation - Assa Abloy Sargent IN100 Installation Instructions Manual

10 Outside Reader Installation

1. Orient the reader so the LED lens is at the top (Fig. 10A).
2. Feed the cable/connector through the door (from outside to inside).
3. Install the reader to the outside of door by aligning the mounting posts with the door
preparation holes. Hold the reader flush against door while ensuring proper alignment.
NOTE: Cable lengths exaggerated for illustrative purposes.
LED
Reader Assembly
with Harness
14 1-800-810-WIRE • www.sargentlock.com • A8189B
Outside of Door
IN100 Cylindrical Lock