Table of Contents
Advertisement
Reader Installation
1. ALIGN reader with mounting holes and
pull cable through as shown. Trim the
threaded rod to length as outlined in
Mounting Screw Length table on page 3.
Diagram 6: Reader Installation
Installing Batteries
1. Install AA lithium batteries
in appropriate position.
2. Install cover and secure
using 2x Screw A.
6 of 12
2. ADD Threadlock to threaded rod.
Secure Reader to cabinet/drawer
using the cut threaded rod and
coupling nut. DO NOT over tighten.
Diagram 7: Installing Batteries
Advertisement
Table of Contents
