Secure Lock To The Door; Assemble Inside Trim - Assa Abloy Sargent IN100 Installation Instructions Manual

IN100 Cylindrical Lock

8 Secure Lock to the Door

1. Slide inside rose assembly and spacer bushing over lockbody.
2. Position ground lug between (top) #10-32x1-1/4" through-bolt
and rose assembly (Fig. 8A).
NOTE: Proper placement of ground wire (Fig. 8B) will prevent
pinching/damage to the ground wire.
3. Secure rose assembly with (2) #10-32x1-1/4" through-bolts.
4. Secure latch by fully tightening (2) #6 x 3/4" self-tapping screws
(refer to previous section 3 - Install Latchbolt).
NOTE: Cable lengths exaggerated for illustrative purposes.
Ground Wire

9 Assemble Inside Trim

1. Verify spacer bushing is inserted horizontally and
aligned with lever (Fig. 9).
2. Place rose over shaft of lockbody against the
surface of the door; hand-tighten, turning clockwise.
3. Attach lever. Push until engaged.
Fig. 8B Detail
Fig. 9
1-800-810-WIRE • www.sargentlock.com • A8189B
Inside of Door
Fig. 8A
Inside of
Door
Rose
Inside lever
13