Battery Installation; Inside Cover Installation - Assa Abloy Sargent IN100 Installation Instructions Manual

13 Battery Installation

1. Place (6) "AA" alkaline batteries in the compartment, being
careful to align polarity properly (Fig. 12).
2. After batteries are installed, there is a slight delay; then red and
green flash*, audible "beep" and lock motor will cycle.
*See Section 8 - LED Indications for more information

14 Inside Cover Installation

1. Assemble cover by hooking top edge on inside
mounting plate.
2. Carefully press bottom of cover toward door without
pinching or damaging wires.
3. Secure cover utilizing security allen wrench (provided).
18 1-800-810-WIRE • www.sargentlock.com • A8189B
IN100 Cylindrical Lock
Fig. 12
Fig. 13
AA Batteries (6)
Inside
Cover
Security Allen
Screw