Specifying The Original Scan Size In Paper Size - Sharp MX-B355W User Manual

FACSIMILE►BASIC TRANSMISSION METHODS
SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER
SIZE
If you placed originals of size other than the original size specified in "Default Original Size Settings", specify the original
size manually.
When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed.
The image is sent in Mono2 only.
Tap the [Original] key.
1
2
Original
8½x11
CA
Preview
3
• If you are sending a long original, tap the [Long Size] key.
Use the automatic document feeder to scan a long original. The maximum width that can be scanned is 19-5/8" (500
mm) (the maximum height is 8-1/2" (216 mm)).
► TRANSMITTABLE ORIGINAL SIZES (page 4-24)
Image
Orientation
Duplex Setup
1-Sided Book Tablet
Start
8½x11
5½x8½ 8½x13
8½x13 2 /
8½x14
Long Size
5
Tap the [Size] key.
Tap the appropriate original size key.
After the settings are completed, tap
4-43
.