Image Settings; Automatically Scanning Both Sides Of An Original (2-Sided Original) - Sharp MX-B355W User Manual

SCANNER/INTERNET FAX►TRANSMITTING AN IMAGE

IMAGE SETTINGS

AUTOMATICALLY SCANNING BOTH SIDES OF AN
ORIGINAL (2-SIDED ORIGINAL)
The automatic document feeder is used to automatically scan both sides of an original.
The settings on 2-sided scanning are cleared when transmission has completed.
• You cannot use 2-Sided scanning when the original size is set to Long Size.
• On the MX-B355W, duplex scanning is not possible when originals of mixed width are scanned.
1
Book
In normal mode, tap the [2-Sided Tablet] or [2-Sided Book] key.
2
Original
8½x11
CA
Preview
To cancel 2-sided scanning:
Tap the [1-Sided] key.
In normal mode, tap the [2-Sided Tablet] key or the [2-Sided Book] key that has been forcibly displayed and cancel the
display.
2-Sided
Original
Tablet
A J
A B
E F
C
L
K L
Image
Orientation
Duplex Setup
1-Sided Book
B/W
Auto Set
Start
Scan transmission
Front and reverse sides are scanned
After tapping the [Original] key, tap the
[Book] or [Tablet] key.
See the figure on the left to check the binding edge of the
original and select the key to be tapped.
Tap the [Image Orientation] key with
the same orientation as the placed
original.
If this setting is not correct, a suitable image may not be
transmitted.
Tablet
After the settings are completed, tap
Colour
Start
5-47
.