Making Copies Using The Bypass Tray - Sharp MX-B355W User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES

MAKING COPIES USING THE BYPASS TRAY

MAKING COPIES USING THE BYPASS TRAY
In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, and other special
media.
For detailed information on paper that can be loaded into the bypass tray, see
For precautions on loading paper into the bypass tray, see
Load paper into the bypass tray.
1
► LOADING PAPER INTO THE BYPASS TRAY (page 1-69)
When you load paper in the bypass tray, the current bypass tray paper type and size appear. To change the
paper type or size, tap the [Change] key.
For the settings, refer to
If paper is already loaded in the bypass tray and you want to change the tray to be used to the bypass tray,
go to step 2.
Tap the [Paper Select] key, and tap the bypass tray key.
2
The bypass tray key shows the previously loaded paper size and type.
If the paper type and size are okay, go to the next step.
If you need to change the paper type or size setting to match the paper placed in the bypass tray, change as explained
in "SPECIFYING A TYPE AND SIZE OF PAPER LOADED ON BYPASS TRAY (page
► SELECTING THE PAPER TRAY FOR COPYING (page 2-12)
Place the original.
3
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-75)
► DOCUMENT GLASS (page 1-77)
Tap the [Start] key to start copying.
4
"LOADING PAPER INTO THE BYPASS TRAY (page
"SPECIFYING A TYPE AND SIZE OF PAPER LOADED ON BYPASS TRAY (page
Current Bypass Tray Settings
are as follows.
Type: Plain Paper 1
(60 - 79 g/m
Size: 8½x11
Tap [Change] to change current paper
Easy
setting and select other paper types.
Copy
2-35
"APPLICABLE PAPER TYPES (page
2 )
Change OK
Settings
Volume
1-62)".
1-69)".
2-36)"
2-36)".
.