Inserting Covers In Copies (Covers/Inserts) - Sharp MX-B355W User Manual

COPIER►OTHER FUNCTIONS

INSERTING COVERS IN COPIES (COVERS/INSERTS)

This function inserts a different type of paper into the pages corresponding to the front and back covers of a copy job.
It is helpful when you want to change cover paper to make resources look better.
Configure insertion sheet settings if needed.
• To insert insertion sheets, see
• For N-Up, the layout is based on the first page and excludes covers.
Copying on a front cover and inserting together with a back cover
1
Front cover paper
Cover inserting examples
The following shows the copy results when front and back covers are inserted into six 1-sided original pages or three
2-sided original pages in the four copy modes below.
1-sided copying of 1-sided originals
Setting conditions for each cover
Front Cover Back Cover
Not copied Not copied
1-sided copy Not copied
2-sided copy Not copied
"INSERTING INSERTION SHEETS IN COPIES (COVERS/INSERTS) (page
2 3 4
Inserts cover sheets at the beginning and end of copies.
1
Makes a 1-sided copy on the first original page for front cover, and inserts a back
cover at the end of copies.
Makes a 2-sided copy on the first and second original pages for front cover, and
inserts a back cover at the end of copies.
5
Back cover paper
Resulting copies
1 2 3
2 3 4
1 3 4
2-88
2-96)".
Front Cover
Back Cover
Copy
4 5 6
5 6
5 6