Using The Document Glass To Send Afax In Direct Tx Mode - Sharp MX-B355W User Manual

FACSIMILE►BASIC TRANSMISSION METHODS
USING THE DOCUMENT GLASS TO SEND A FAX IN
DIRECT TX MODE
Sending a scanned original without saving it in the machine's memory is called "Direct TX".
This section explains how to scan the original placed on the document glass and directly send data.
When sending a fax from the document glass in direct transmission mode, only one page can be transmitted.
• The following functions cannot be used with direct transmission:
Timer Transmission, N-Up, Card Shot, Job Build, Polling Memory, Original Count, File, Quick File, Memory Box, Poling,
2-Sided Scan, Search Global Address Book
• Resending will not take place when a direct transmission is not successful due to a communication error or other reason.
• If a fax transmission is already in progress when the direct transmission operation is performed, the direct transmission will
wait until the previous transmission is finished. When the previous transmission is completed, the direct transmission will
begin.
• While the direct transmission is waiting, the job status display can be tapped to display the job status screen. No other
operations are possible.
► FAX JOBS (page 4-114)
• The [Preview] key cannot be used for transmission.
Tap the [Detail] key to change to normal mode.
1
► Changing mode from each mode (page 4-8)
Place the original on the document glass.
2
► DOCUMENT GLASS (page 1-77)
When faxing a multi-page original, scan each page in order starting from the first page.
3
8½x11 8½x11
4-32
Specify the destination fax number,
and tap [Direct TX] on the action panel.