Making A Proof Copy (Proof Copy) - Sharp MX-B355W User Manual

COPIER►OTHER FUNCTIONS

MAKING A PROOF COPY (PROOF COPY)

This function makes a proof copy before printing the specified number of copies. Check the preview image with a proof
copy. If necessary, change the settings. Using this function stores the scanned original in the machine, saving you the
trouble of re-scanning the original in the changed setting.
Proof copy flow
Select "Proof Copy" and
set 5 sets of copies
• Proof Copy must be specified before scanning the original.
• If Proof Copy is executed while the machine is printing another job, the job in progress is interrupted, and a proof copy is
printed preferentially. The interrupted job will resume after proof copying has been completed.
However, if proof copy is executed during printing of a job for which both 2-sided printing and staple function are enabled,
the proof copy will be printed after the job in progress is finished.
If the [Start Print] key is tapped to execute printing of the remaining sets while the machine is printing another job, the
remaining sets will be printed after all previously reserved jobs are completed.
Tap the [Others] key, and tap the [Proof Copy] key.
1
A checkmark appears on the icon.
After the settings are completed, tap the [Back] key.
To cancel the Proof copy setting:
Tap the [Proof Copy] key to uncheck it.
As necessary, specify the required functions such as "Exposure" and "Copy
2
Ratio".
One set of copies is
printed for you to check
Adjust the settings
2-61
The remaining 4 sets are printed
If OK
After adjustment, one set
is printed for you to
check
The remaining 4 sets are
printed