Encrypting The Transmitted Data (Encryption) - Sharp MX-B355W User Manual

SCANNER/INTERNET FAX►OTHER FUNCTIONS

ENCRYPTING THE TRANSMITTED DATA (ENCRYPTION)

You can encrypt the transmitted data to strengthen security.
This function is available for Scan to E-mail.
To encrypt transmitted data
• In "Settings (administrator)", select [System Settings] → [Security Settings] → [S/MIME Settings] → [Condition Settings].
• When [Select at Sending] is selected in "Encrypt E-mail" in "Settings (administrator)", you can specify whether or not the data
is encrypted each time you send an image. When [Always Enable] is selected, the setting cannot be changed.
Place the original.
1
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-75)
► DOCUMENT GLASS (page 1-77)
Tap the mode display to switch to the initial screen of E-mail mode.
2
► Changing mode from each mode (page 5-10)
Specify the destination.
3
► RETRIEVING A DESTINATION FROM AN ADDRESS BOOK (page 5-15)
► VIEWING A LIST OF THE SELECTED DESTINATIONS (page 5-18)
► USING A SEARCH NUMBER TO RETRIEVE A DESTINATION (page 5-19)
► RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK (page 5-22)
• Data encryption is not possible when the address is directly entered.
• Encrypted data can only be sent to an address for which you have registered a user certificate.
Register a user certificate for the address in "Settings (Web version)" - [Address Book] → [E-mail]
→ "User Certificate". Only one E-mail address can be registered for an address that has a user certificate.
• If the "Disable sending to the addresses which cannot be encrypted." checkbox is (
[System Settings] → [Security Settings] → [S/MIME Settings] → [Condition Settings] → [Encryption Settings],
addresses without a user certificate cannot be selected. When the checkmark is removed (
without encryption.
4
To cancel the encryption setting
Tap the [Encrypt E-mail] key to remove the checkmark.
Preview
Start
8½x11 8½x11
5-118
Tap the [Others] key, and tap the
[Encrypt E-mail] key.
A checkmark appears on the icon.
After the settings are completed, tap the [Back] key.
CA
) in "Settings (administrator)" -
), the data is sent