Initiating Polling Reception Manually - Sharp MX-B355W User Manual

FACSIMILE►OTHERS FUNCTION

INITIATING POLLING RECEPTION MANUALLY

Use the manual polling reception when you must start polling after listening to a recorded greeting, such as when using
a fax information service.
• Make sure there is no original in the machine when using the polling reception function.
• This function cannot be used to poll multiple machines (serial polling).
• The function can only be used when the other machine is Super G3 or G3 compatible and has a polling function.
The receiving machine bears the expense (phone charges) of the polling reception.
1
Enter the destination fax number.
2
• Entering a destination number using the numeric keys
• Retrieving a destination from an address book
• Using a search number to retrieve a destination
• Retrieving a destination from a global address book
• Using a transmission log to resend
One-touch key for a contact or group in which multiple destinations are stored, and one-touch key for which an address
other than fax number is stored cannot be used.
After tapping the [Speaker] key, you can tap the [Speaker Volume] key to adjust the volume of the speaker.
Tap the [Others] key, and tap the [Polling] key to receive originals (data).
3
A checkmark appears on the icon.
To cancel the Polling setting:
Tap the [Polling] key to clear the checkmark.
8½x11 8½x11
►page 4-12
►page 4-15
►page 4-18
4-86
Tap the [Speaker] key.
You will hear the dial tone through the machine's speaker.
►page 4-11
►page 4-16