Tray 1 - 4 - Sharp MX-B355W User Manual

BEFORE USING THE MACHINE►LOADING PAPER

TRAY 1 - 4

A maximum of 500 sheets of paper from size 5-1/2" x 8-1/2" to 8-1/2" x 11" (A6 to A4) can be loaded into tray 1.
(150 sheets when the paper is A6)
A maximum of 600 sheets of paper from size 5-1/2" x 8-1/2" to 8-1/2" x 14" (A5 to A4) can be loaded into trays 2 to 4.
If you loaded paper of a different type or size from the paper previously loaded, be sure to check the settings in "Settings
(administrator)". Incorrect setting affects automatic paper selection action. It may cause print failure, printing on paper of a
wrong size or type or paper misfeeds.
Do not place heavy objects on the tray or press down on the tray.
To check the type and size of paper:
[Tray Settings] in the home screen or in "Settings", select [Status] → [Machine Identification] → [Paper Input Tray Status] →
[Paper Tray Settings].
To set the type and size of paper:
Set this in [Tray Settings] in the home screen or in "Settings" - [System Settings]→[Common Settings]→[Paper
Settings]→[Paper Tray Settings].
Tray 1
1
Tray 2 - 4
When using the tray 1, push the center of the pressure plate down until it locks into place.
Pull out the paper tray.
Gently pull the tray out until it stops.
To load paper, go to step 3. To load a different size of
paper, go to the next step.
1-66