Sharp MX-B355W User Manual page 172

COPIER►OTHER FUNCTIONS
Place the original.
1
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-75)
► DOCUMENT GLASS (page 1-77)
If the originals are 2-sided, place them in the document feeder tray.
Tap the [Others] key and then the [Booklet] key.
2
Select the binding edge.
3
To cancel the booklet setting:
Tap the [Off] key.
4
Others
Booklet
Select Output Binding Edge.
Off
Left Binding/
Tablet
Right Binding
Others
When inserting a cover, tap the [Cover Setting] key, and tap the [On] key.
5
After the settings are completed, tap
To change the cover input tray:
Tap the [Paper Tray] key to display the tray selection screen.
Tap the cover input tray on the tray selection screen.
For more information, see
• If the cover will be copied on, label sheets, transparency film cannot be used.
• To cancel all settings:
Tap the [CA] key.
Tap the [Start] key to start copying.
6
N-Up
Put Multiple Pages in A Page
Paper Select
Change Paper Feed Tray
Original
Change Size/Direction.
Select Original Type. Erase
Erase Shadow Around
1-Sided
2-Sided
Booklet
2-Sided
Tablet
Preview
Cover Setting
Start
8½x11
8½x11
and [Back] keys in sequence.
"SELECTING THE PAPER TRAY FOR COPYING (page
2-53
Tap the [1-Sided], [2-Sided Booklet] or
[2-Sided Tablet] key as appropriate for
the original.
When not inserting a cover, go to step 6.
CA
2-12)".