Specifying The Original Scan Size In Paper Size - Sharp MX-M905 User Manual

FACSIMILE►BASIC TRANSMISSION METHODS
SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER
SIZE
When the original size is not standard (inch size or non-standard size) or is not detected correctly, manually specify the
original size.
When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed.
The image is sent in Mono2 only.
Tap the [Detail] key to change to normal mode.
1
► Changing mode from each mode (page 4-8)
Tap the [Original] key.
2
3
Address
Address Book
Original
Scan Size
Auto 8½x11
2-Sided
Tablet
2-Sided
Booklet
Others
4
Address
Address Book
Scan Size
Auto 8½x11
AB Inch
5½x8½
5½x8½R
8½x11
Others
• If you are sending a long original, tap the [Long Size] key.
Use the automatic document feeder to scan a long original. The maximum width that can be scanned is 39-3/8" (1,000
mm) (the maximum height is 11-5/8" (297 mm)).
► TRANSMITTABLE ORIGINAL SIZES (page 4-24)
Dual Page Scan
Fax Number
Divide into 2 Pages
N-Up
Put Multiple Pages in A Page
Slow Scan Mode
Scan Thin Paper Original
Send Size
100%
Auto 8½x11
Image Orientation
Preview
Speaker
reception memory 100%
Dual Page Scan
Fax Number
Divide into 2 Pages
N-Up
Put Multiple Pages in A Page
Slow Scan Mode
Scan Thin Paper Original
Direct Entry Custom Size
8½x11R 11x17
8½x13 8½x13 2 /
5
8½x14 Long Size
Preview
Speaker
reception memory 100%
Tap the [Scan Size] key.
CA
Start
Tap the appropriate original size key.
After the settings are completed, tap
CA
Start
4-45
.