Favorite Operation Group; Favorite Operation Group List - Sharp MX-B355W User Manual

SYSTEM SETTINGS►USER CONTROL

Favorite Operation Group

Favorite Operation Group List

The preferred operation environment can be set for each group. For example, a user who speaks a different language
would normally have to change the display language each time he or she uses the machine; however, by registering the
language in a favorite operation group in advance, the language is automatically selected when the user logs in.
• Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
• This setting can only be configured in Setting mode (Web version). It cannot be configured in the touch panel of the
machine.
Adding/editing a group
Tap the [Add] key to display the favorite operation group registration screen.
Tap a group name to display the registration screen for that favorite operation group. You can edit the group in this
screen.
Settings
Item
Group Name
Select the Group Name to be the
Registration Model
Copy
Initial Status Settings
Image Send
Initial Status Settings
Document Filing
Image Orientation
Initial Status Settings
System Settings
Enlarge Display Mode
AB/Inch Type Setting
Cancel Detection at Document
Glass
Language Setting
Switch the Number of Sets to be
Displayed for Job Status
Key Operation Setting
Time for Accepting Key Entry of
Long Touch
Double Tap Interval Setting
Keys Touch Sound
Store a name of group (up to 32 characters).
Select one of the previously stored groups for use as a template for the new group. When
selected, the settings of this group are applied.
Select settings for Image Orientation, Paper Tray, Exposure Type, Copy Ratio, 2-Sided,
Original Binding, Output Binding, Output, Offset, and Separator Page.
Select settings for Image Orientation, Exposure, Resolution, Color Mode, File Format, and
Original Image Type. Select settings for Specified Pages per File, and Fax Sender Name.
Specify the image orientation.
Select settings for Color Mode, Exposure, Original Image Type, and Resolution.
Turn this option ON to display large characters on the Setting mode screen.
The numbers and units of the default settings and input ranges that appear in the setting
screens can be switched between inches and AB sizes.
Original size detection on the document glass can be disabled. When this is done, all
originals placed on the document glass are treated as special size originals.
Select the display language.
Select whether to display the number of progress sets or remaining sets as the job status.
Set the key input time and Auto Key Repeat setting.
Select a time when a long key touch is detected.
Select an interval when a double tap is detected.
Set the sound made when keys are touched.
7-74
Description