Automatic 2-Sided Copying; Using The Automatic Document Feeder For 2-Sided Copying - Sharp MX-B355W User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES

AUTOMATIC 2-SIDED COPYING

USING THE AUTOMATIC DOCUMENT FEEDER FOR
2-SIDED COPYING
Originals
Automatic 2-sided copying of
1-sided originals
• To make 2-sided copies, configure the 2-sided copy settings before scanning the original.
• Dual-side copy helps to save paper.
Place the original in the document feeder tray of the automatic document
1
feeder.
► AUTOMATIC DOCUMENT FEEDER (page 1-75)
Tap the [2-Sided Copy] key.
2
► COPYING SEQUENCE (page 2-7)
3
2-Sided Copy
1 → 1 1 → 2
Original Binding
Book Tablet
CA
Preview
Check the paper (tray) you want to use for copying, and tap the keys for any
4
other settings you want to select.
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-29)
• Paper Select ►page 2-12
• Copy Ratio ►page 2-22
Staple
• ►page
• Original ►page 2-29
• Exposure ►page 2-19
• N-Up ►page 2-41
• Card Shot ►page 2-43
Copies Originals
Automatic 2-sided copying of
2-sided originals
(1)
2 → 2 2 → 1
(3)
(2)
Output Binding
Book Tablet
1
Copies
2-38, ►page 2-38
Copies
Select 2-sided copy mode.
(1) Select the 2-sided copy type.
(4)
(2) When the original is set to "2-Sided", select "Tablet" or
"Book" in "Original Binding".
(3) When the output is set to "2-Sided", select "Tablet" or
"Book" in "Output Binding".
(4) After the settings are completed, tap
Start
2-16
Originals Copies
1-sided copying of 2-sided
originals
.