Making Copies Using The Bypass Tray; Specifying A Type And Size Of Paper Loaded On Bypass Tray - Sharp MX-B350W User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES

MAKING COPIES USING THE BYPASS TRAY

In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, and other special
media.
For detailed information on paper that can be loaded into the bypass tray, see
For precautions on loading paper into the bypass tray, see
SPECIFYING A TYPE AND SIZE OF PAPER LOADED ON
BYPASS TRAY
Select "Paper" in the right menu of the base screen of copy mode and press
1
the [OK] key.
Paper Select
2
8½x11
8½x11
8½x11
Set Completed
Paper Type Set
3
Plain 1
Plain 2
Heavy Paper 1
Set Completed
Paper Size Set
4
8½x11
7¼x10½
5½x8½
inch
Paper Size Set
5
7¼x10½
5½x8½
inch
A4
"LOADING PAPER INTO THE BYPASS TRAY (page
Select "Paper" with the [ ][ ] keys, and press the [OK]
key.
Press the [SPECIAL FUNCTION] key, select "Paper Type
Set", and select the type of paper to be used in the
bypass tray.
Select the paper type with the [
To use an envelope, go to step 7.
Press the [SPECIAL FUNCTION] key, select "Paper Size
Set", and select the paper size used in the bypass tray.
Select the paper size with the [
select Paper Size, press the [OK] key, and specify the paper size.
The specified paper size appears in the paper size field of the base screen.
To use a special paper size, go to step 5.
● Special paper size
Select "mm" or "inch" and press the [OK] key.
2-13
"APPLICABLE PAPER TYPES (page
][ ] keys. When finished, press the [OK] key.
][ ] keys. If the paper size is a standard size,
1-17)".
1-24)".