Front Panel - Extron electronics FOXBOX Tx HDMI User Manual

Connect the free end of this fiber optic cable to either:
The Rx connector on the FOXBOX Tx transmitter
other compatible Extron FOX device
The Rx connector on another receiver in the daisy chain
Tx Link and Rx Link LEDs — When lit, the link is active (light is received).
Remote RS-232 port
R
connect a host device, such as a computer, touch panel control, or RS-232 capable
PDA, to the transmitter via this 3-pole captive screw connector. See
connections on page 13 to wire this connector. See
SIS commands and software control.
DC power connector
S
connector. See Power supply wiring

Front panel

T T V V U U
CONFIG
Figure 7. FOXBOX Rx Receiver Front Panel Features
Power LED — T his LED lights to indicate that power is applied to the unit .
T
Indicators —
U
HDMI LED — HDMI video input
HDCP LED — This LED lights when the output signal is HDCP encrypted.
Audio LED — This LED lights on the receiver when the transmitter detects a low level
audio signal for a short period of time. It returns to unlit if the audio signal drops below
the minimum threshold for a short period of time.
Configuration port — Connect a controlling device, such as a PC, to this port via
V
a 2.5 mm mini jack TRS RS-232 cable for RS-232 protocol control of all FOXBOX
functions. See Front panel Configuration ports
adapter cable. See Remote Control
control.
The TRS RS-232 cable is included with the FOXBOX Tx HDMI transmitter.
(see figure 4 on page 9) — For serial control of the receiver,
— Plug the included external 12 VDC power supply into this
on page 15, to wire the connector.
on page 17 for SIS commands and software
FOXBOX Tx/Rx HDMI • Installation
(item on page 7) or to any
2
RS-232
Remote Control on page 18 for
FOXBOX Rx HDMI
on page 14 for more details on the
11