Extron electronics FOXBOX Tx HDMI User Manual page 41

Mute panel
NOTE: The panel controls are available only if you are
Mute
connected to the receiver.
Click the radio button, the
Video Mute
to turn the video and audio mutes on and off.
I/O Configuration tab functions
Click the /
I O Configuration
Figure 21. I/O Tab
Output Configuration panel
NOTE: The
Output Configuration
only if you are connected to the receiver.
The
Video Shutdown Delay
during an input rate change. Only video is delayed; embedded audio is not delayed.
HDCP panel
NOTE: • The
HDCP Authorized
you are connected to the transmitter.
• The
HDCP Notification
if you are connected to the receiver.
Both sets of radio buttons cannot be available for
selection at the same time.
HDCP Authorized radio buttons — The
•
whether the transmitter operates as an HDCP authorized device or not. An HDCP
authorized device allows an HDMI source to output HDCP-encrypted video. A
non-authorized setting is useful for video sources that always encrypt their output if
the connected device (the transmitter in this example) is HDCP capable. If the display
connected to the receiver is not HDCP compliant, this automatic encryption would
result in no display.
• HDCP Notification radio buttons — The HDCP notification function in the receiver
enables a connected display to show a green or black screen if the transmitted HDMI
video is HDCP encrypted and the display is not HDCP capable.
radio button, or both in the
Audio Mute
tab to access the functions described below.
panel control is available
setting delays the digital video to help monitor sync correctly
controls are available only if
controls are available only
authorized function determines
HDCP
FOXBOX Tx/Rx HDMI • Remote Control
panel
Mute
33